Writing a persuasive essay is much like preparing for a debate. You need to study your persuasive essay topic from various perspectives, establish your main argument and gather supporting evidence. You also need to know how to write a persuasive essay, namely how to organize parts of the persuasive essay in the way that will work best.
Try the following instructions on how to write a persuasive essay. They are indispensable in writing a well-planned and thoroughly considered persuasive essay.
1.Start with an Impressive Lead-In
The introduction of your persuasive essay is the first words you utter to render the readers to be well-disposed to you. Moreover, it is by the introduction that the reader decides whether to go on reading you essay or leave it in peace. Thus, the introduction of your essay should be attention grabbing and impressive enough to induce the reader to read further on.
Writing a persuasive essay, you need to pay particular attention to the first sentence you are going to write down, namely a lead-in. It is the most important part of the whole persuasive essay, out of which you come out either a winner or a loser.
To write a strong and impressive lead-in, try the following strategies:
7.start with an unusual detail;
8.put a strong statement;
9.quote a famous person;
10.introduce a short and up-to-the-point anecdote;
11.open the essay with a statistic or fact;
12.start with an emphatic rhetorical question;
Before deciding on one of the strategies, try all of them. You will be surprised to find out how different strategies can enrich and smarten up the introduction to your persuasive essay.
After you have put the opening sentence, be sure to introduce a sentence that will show that you see both pros and cons of the subject matter under consideration. Then write a thesis or focus statement, which has to reveal your own point of view. A well-formulated thesis statement is the key to success, as it is the central part of your essay, around which all other parts are organized.
Remember that a good introduction should be brief, concise and end with a closing sentence that will be transitional to the next paragrath.
2.Support Your Thesis in the Body
The body of your persuasive essay is the main part of your writing where you present supporting evidence and elaborate on the reasons you stated previously. The body should be a proof that you have researched and examined your persuasive essay topic and that your arguments are reasonable and reliable.
In order to prove your thesis statement and dispel the opposing arguments, you need to:
1) state the facts of the case; 2) prove your thesis with arguments; and 3) disprove your opponent's arguments in three consecutive steps.
Statement of facts is a non-argumentative presentation of details, summaries and narration concerning the problem discussion. In this part of the body you should present supporting evidence without stating your own point of view and trying to persuade the readers in it.
First, you should remind the readers of some events, provide vivid illustrations that will show the significance of the topic. Statement of facts should be clear, brief, and vivid. If you obscure the facts, you are defeating the purpose. Thus, delete irrelevant information and information which contributes little to the reader's understanding.
After you've introduced some facts, you can get down to proving your thesis with arguments. This should be the longest section and the central part of your persuasive essay. With the readers rendered attentive by the introduction and informed by the statement of fact, you must show why your position concerning the facts should be accepted and believed.
Now comes the time to deny the truth on which the opposing argument is built. Be patient in thinking over the refutation. It is the most difficult stage that needs time, concentration and absorption.
The proven way to hook readers' attention is to leave your strongest argument for last so that to leave them with your best thought.
3.Write a Memorable Conclusion.
Your conclusion should be a "mirror image" of your introduction. It means that you should refresh the reader's memory and remind him of the thesis statement you put in the introduction. It is not a mere waste of time or words, but the best way to convince the reader to take your side.
As well as in writing the introduction, you can try several ways to write a memorable conclusion for your persuasive essay.
Except for restating the introduction, you can summarize the main points to enable the readers to recall the main points of your position.
A nice way to conclude the persuasive essay is to write a personal comment or call for action. It could be: 1) your prediction; 2) a question that will let the readers make their own predictions; 3) your recommendations to solve a problem; 4) a quotation. It's up to you to decide!
The last line of your persuasive essay, that is the "tag line," needs special attention, for it is the second most important line after the lead-in. Thus, it is important that it:
4.renders the readers to be well disposed to you;
5.magnifies your points;
6.puts the readers in the proper mood.
Once you have put the full stop after the "tag line", your work is over. But make sure that the words you have put in your persuasive essay will be "working" long after your readers stop reading it.
Writer : Linda
Showing posts with label Hobbies. Show all posts
Showing posts with label Hobbies. Show all posts
4/11/2013
How to Paint your Own Motorcycle
Motorcycle and chopper painting tutorial
PAINT AND PREP SUPPLIES
Reducer
Plastic Filler
Flowable Putty Epoxy primer Epoxy Sealer Base color Paint Clear Coat 80,120,400,600,1500,2000 grit wet/dry sandpaper IMPROVISED PAINT BOOTH If you're like me, you don't have the luxury of a down-draft spray booth in your shop. Here's what I did. I cleaned out a storage room that's attached to the back of my shop. I lined the walls with white poly, and placed a variable speed fan in the window. I then went around with a roll of duct tape and sealed the perimeter of the fan to the surrounding poly on the walls. Now onto the lights. After the first time you try painting something, you'll quickly learn just how critical good lighting is. In fact when it comes to lighting, the brighter your paint area the better. A buddy gave me two four-tube florescent light fixtures, which I hung on opposite sides of my new spray booth. It's good to have reflective walls. Lining the walls with white poly not only saves your walls, but it's also quite reflective. SAFETY Before I continue, I want to stress safety. It's a very bad I idea to paint in a room that's attached to your house. In fact, it may not be legal in some jurisdictions. Also, paint fumes are not only super toxic, they're highly flammable. Make sure your fixtures are wired properly, and that your fixtures are fully encased with lens covers attached. Last but not least, make sure you have a good quality respirator with the correct filters for the kind of paint you're using. PAINT EQUIPMENT For tools you'll need at least two spray guns, a air regulator with a water trap, a compressor, and of course some air hose. As aforementioned, you'll need 2 paint guns... one for painting primer, and another for painting base and clear coats. PREP FOR PAINT Be certain your fuel and oil tanks are pressure tested and leak free before you start. Ideally, it's good to sandblast your metal parts, especially if they have old paint on them. If you choose not to sandblast, make sure to sand them really thoroughly and wipe them down with a non oil-based cleaner prior to starting the job. The next step is to apply filler to the low spots and any trouble areas. It's a matter of personal preference, but I like to spray a coat of epoxy primer prior to spraying on the base coat. This gives a nice base for the filler to adhere to. Prepare your filler in small amounts (it sets up fast) and apply it smoothly and evenly onto your part. After the filler has dried, sand it smooth with 80 grit and look it over for any low spots or chips, then fill and sand again. After the necessary rounds of filler and sanding are finished, it's time to prime.
PAINT AND PREP SUPPLIES
Reducer
Plastic Filler
Flowable Putty Epoxy primer Epoxy Sealer Base color Paint Clear Coat 80,120,400,600,1500,2000 grit wet/dry sandpaper IMPROVISED PAINT BOOTH If you're like me, you don't have the luxury of a down-draft spray booth in your shop. Here's what I did. I cleaned out a storage room that's attached to the back of my shop. I lined the walls with white poly, and placed a variable speed fan in the window. I then went around with a roll of duct tape and sealed the perimeter of the fan to the surrounding poly on the walls. Now onto the lights. After the first time you try painting something, you'll quickly learn just how critical good lighting is. In fact when it comes to lighting, the brighter your paint area the better. A buddy gave me two four-tube florescent light fixtures, which I hung on opposite sides of my new spray booth. It's good to have reflective walls. Lining the walls with white poly not only saves your walls, but it's also quite reflective. SAFETY Before I continue, I want to stress safety. It's a very bad I idea to paint in a room that's attached to your house. In fact, it may not be legal in some jurisdictions. Also, paint fumes are not only super toxic, they're highly flammable. Make sure your fixtures are wired properly, and that your fixtures are fully encased with lens covers attached. Last but not least, make sure you have a good quality respirator with the correct filters for the kind of paint you're using. PAINT EQUIPMENT For tools you'll need at least two spray guns, a air regulator with a water trap, a compressor, and of course some air hose. As aforementioned, you'll need 2 paint guns... one for painting primer, and another for painting base and clear coats. PREP FOR PAINT Be certain your fuel and oil tanks are pressure tested and leak free before you start. Ideally, it's good to sandblast your metal parts, especially if they have old paint on them. If you choose not to sandblast, make sure to sand them really thoroughly and wipe them down with a non oil-based cleaner prior to starting the job. The next step is to apply filler to the low spots and any trouble areas. It's a matter of personal preference, but I like to spray a coat of epoxy primer prior to spraying on the base coat. This gives a nice base for the filler to adhere to. Prepare your filler in small amounts (it sets up fast) and apply it smoothly and evenly onto your part. After the filler has dried, sand it smooth with 80 grit and look it over for any low spots or chips, then fill and sand again. After the necessary rounds of filler and sanding are finished, it's time to prime.
How to Grow Apple Trees From Seed
How To Grow Apple Trees From Seed
Have you ever tried to grow apple trees from seeds collected from an apple? It certainly makes good sense that they would germinate. They are seeds and seeds are supposed to grow, right?
I've heard people say apples seeds collected from apples are hybridized and therefore can't grow because hybrids are sterile.
They are correct in that most commercially grown apples hold hybridized seeds inside. They are probably incorrect that this is the reason why your apple seeds don't germinate.
Bees bring pollen from one tree to the next. If the bee recently visited a delicious apple tree then visits a granny smith apple tree the resulting apples would produce delicious x granny smith seeds.
You might come up with the next award winning apple variety but don't count on it.
These seeds are not going to produce a granny smith or a delicious apple tree. They would produce a tree with mixed genetics.
Granny smith and delicious are hybrids themselves, this means the new seeds would be ploy-hybrid. This doesn't have much to do with viability; the seeds can still be fertile. The myth that seeds collected from hybridized apples are sterile might be caused by the fact that apple seeds need to be stratified before they will germinate. Stratification means the seeds have to be treated with cool temperatures for a certain length of time before they will germinate. Most people probably don't think to stratify their apple seeds. The seeds never germinate hence the idea that they are sterile or infertile.
If you collect seeds from an apple and put them in soil or a terrarium, your apple seeds likely won't germinate for 2 reasons. The seeds need a dry out period followed by a stratification period. If you skip these 2 steps you probably won't have success germinating your apple seeds.
If you want to germinate apple seeds collected from an apple first let the seeds dry out for 3-4 weeks. Set the seeds on a piece of wax paper etc and roll them over every day or 2. After a month or so the seeds lose that dark shine and get a lighter dryer look. This is a good indication the seeds have dried well.
Once the seeds are dry put them in a container or zip lock bag. You can also add soil if you wish. Place the container or bag in your refrigerator for about 3 months.
If you chose to add soil you can moisten the soil after about 10 or 11 weeks. Keep a good watch on the bag and let fresh air in often. You should start to see leaves popping out of the soil in a few weeks if everything went right.
If you didn't choose to add soil you can try to plant the seeds directly into pots or in the ground. If you time it out you can let the seeds dry over the winter and put them into the refrigerator 3 months before the frost usually leaves. Cool weather seems to help apple seeds sprout as well. Commercially grown apple varieties are usually grafted to a wild variety rootstock. The wild variety will be hearty and adapted to the local climate. This method not only produces more apples, without grafting, certain varieties wouldn't be able to grow in certain climates. Grafting allows commercial farmers to produce more varieties in limited opportunity type climates.
This brings another complication into the whole idea of growing cross pollinated apple seeds. You don't know it the new variety you get will be tolerant to you local climate. The tree might simply die off after a winter or 2.
If you do manage to succeed in starting apple trees from seed don't forget to protect them from critters. Rabbits and deer like to eat fruit trees, especially young tender ones. Put up some kind of fence for rabbits and use other defenses against deer etc.
Deer, rabbits and other herbivores have also very likely been the culprits of that mystical apple tree that appeared in your field or at your cabin and in those areas that don't usually get mowed. Animals eat apples and the seeds that pass through these animals can still be viable. I've seen many apple trees spring up in my aunt's horse pasture when I was growing up. We would collect apples from wild trees growing in the woods and feed the scabby ones to her horses in the autumn. The following summer new apple trees would sprout up around the pasture.
A Good time to collect apple seeds is when mom is making an apple pie. Sometimes I eat an apple I think is exceptional and save the seeds. Who knows I might get lucky or I might just have a little fun.
Growing apple trees from commercially grown seeds isn't really a bad thing. It would make a great project if you are interested in seeing what kind of apples you will get. I suggest starting this project at a young age if you want to see the results though.
Another reason to start apples from seed would be for a science fair project. You could try germinating apple seeds that have been stratified for different periods of time, some that were frozen, some that were never stratified and see which method produced the best results.
2/17/2011
How to Make a Mermaid Style Dress-mermaid style prom dresses Read more: http://www.articlesbase.com/clothing-articles/how-to-make-a-mermaid-style-dress-mermaid-style-prom-dresses-4255609.html#ixzz1EHpwugsR Under Creative Commons License: Attribution
How to Make a Mermaid Style Dress-mermaid style prom dresses
1
Find a basic sheath skirt pattern or sheath dress pattern that you will alter into a mermaid style. This pattern will have several panels that create the sheath shape of the skirt. Cut the pattern pieces for your measurements.
2
Cut the skirt panels off at knee length, or at the length you would like the fanned part of the mermaid dress to begin.
3
Pin the skirt or dress pattern pieces to the dress fabric. Cut the pieces from the fabric following the directions on the pieces.
4
Unpin the pattern pieces from the fabric pieces. Pin the skirt panels together along the long edges, right sides together.
5
Sew the skirt panels on the sewing machine, using the directed seam allowances. Iron the seam allowances flat. If you are working with a full dress pattern, sew the bodice together as directed in the pattern instructions.
6
Measure the circumference of the skirt bottom. Multiply this measurement by 2 1/2.
7
Measure the distance from the skirt bottom to the floor. Add 1 1/2 inches to this measurement.
8
Cut a rectangle from your dress fabric that is as wide as the distance you measured in Step 7 and as long as the distance you measured in Step 6.
9
Pin the short edges of the rectangle together, right sides touching. Sew the edges together 1/2 inch away, then iron the seam allowances flat.
10
Turn under one of the long edges of the rectangle 1/2 inch, then another 1/2 inch. Sew along the fold line and iron the fabric flat.
11
Sew a gather stitch to the other long rectangle edge, 1/4 inch away from the edge. Sew another gather stitch 1/4 inch away from that stitch line.
12
Pull the gathers so that the edge of the rectangle fits the bottom edge of the skirt. Pin the rectangle edge to the skirt edge, right sides together.
13
Sew the gathered rectangle to the bottom edge of the skirt. Iron the seam allowances toward the skirt, and pull out the gather stitches.
mermaid style prom dresses from http://www.weddinggownswholesale.com/mermaid-style-prom-dresses-p-4369.html The mermaid style prom dresses has a narrow shape that flows all the way down from the neckline for the hem. This gown, also referred to as a sheath, has a tendency to hug the body along with show any and all of your curves. The line is appropriate for all varieties of weddings, especially causal events on the beach, as well as intimate evening events at a banquet hall.Sheath fashion gown are suited to thin figured as well as petit framed women. They could also be considered for many women with a hour glass figure shaped body,not for thick or quick waisted, full figured, or have a very pear shaped body type
1
Find a basic sheath skirt pattern or sheath dress pattern that you will alter into a mermaid style. This pattern will have several panels that create the sheath shape of the skirt. Cut the pattern pieces for your measurements.
2
Cut the skirt panels off at knee length, or at the length you would like the fanned part of the mermaid dress to begin.
3
Pin the skirt or dress pattern pieces to the dress fabric. Cut the pieces from the fabric following the directions on the pieces.
4
Unpin the pattern pieces from the fabric pieces. Pin the skirt panels together along the long edges, right sides together.
5
Sew the skirt panels on the sewing machine, using the directed seam allowances. Iron the seam allowances flat. If you are working with a full dress pattern, sew the bodice together as directed in the pattern instructions.
6
Measure the circumference of the skirt bottom. Multiply this measurement by 2 1/2.
7
Measure the distance from the skirt bottom to the floor. Add 1 1/2 inches to this measurement.
8
Cut a rectangle from your dress fabric that is as wide as the distance you measured in Step 7 and as long as the distance you measured in Step 6.
9
Pin the short edges of the rectangle together, right sides touching. Sew the edges together 1/2 inch away, then iron the seam allowances flat.
10
Turn under one of the long edges of the rectangle 1/2 inch, then another 1/2 inch. Sew along the fold line and iron the fabric flat.
11
Sew a gather stitch to the other long rectangle edge, 1/4 inch away from the edge. Sew another gather stitch 1/4 inch away from that stitch line.
12
Pull the gathers so that the edge of the rectangle fits the bottom edge of the skirt. Pin the rectangle edge to the skirt edge, right sides together.
13
Sew the gathered rectangle to the bottom edge of the skirt. Iron the seam allowances toward the skirt, and pull out the gather stitches.
mermaid style prom dresses from http://www.weddinggownswholesale.com/mermaid-style-prom-dresses-p-4369.html The mermaid style prom dresses has a narrow shape that flows all the way down from the neckline for the hem. This gown, also referred to as a sheath, has a tendency to hug the body along with show any and all of your curves. The line is appropriate for all varieties of weddings, especially causal events on the beach, as well as intimate evening events at a banquet hall.Sheath fashion gown are suited to thin figured as well as petit framed women. They could also be considered for many women with a hour glass figure shaped body,not for thick or quick waisted, full figured, or have a very pear shaped body type
How to Make Your Own Beat
In all honesty it can be difficult knowing where to start when you want to know how to make your own beat, there are so many questions you want to ask but finding the right answers can be a struggle.
Don't worry it's the same for everyone, at least it was for me! The most important thing to realize is that the reward of hearing music you have made from scratch is like no other and most definitely worth the effort.
It's important to have a clear idea of what type of music it is that you would like to produce. In my case I love rap and hip hop music so I was very keen to find a high quality hip hop beat maker.
The two fundamental things you will need to start producing your first beats is a sequencer and a library of high quality samples. The sequencer will be used to place your chosen samples in a particular order - think of it as your canvas and your samples as your paint.
I would highly recommend listening very careful to the structure of some of your favorite artists tracks paying close attention to the types of sounds used as well as the way they are layered and positioned. This may seem obvious but it will really help you to make your own beat sound better and more professional.
Also, make sure you don't get lured in by free online beat makers as they really are a waste of time in my opinion. The samples they use are limited in quantity and severely lacking in quality. You won't be able to produce anything of any real quality on these so steer clear and look for a decent hip hop beat maker.
I was lucky enough to find one which allowed me to produce my first tune in under ten minutes! Seriously if you are serious and really want to make your own beat then there really is nothing holding you back.
Don't worry it's the same for everyone, at least it was for me! The most important thing to realize is that the reward of hearing music you have made from scratch is like no other and most definitely worth the effort.
It's important to have a clear idea of what type of music it is that you would like to produce. In my case I love rap and hip hop music so I was very keen to find a high quality hip hop beat maker.
The two fundamental things you will need to start producing your first beats is a sequencer and a library of high quality samples. The sequencer will be used to place your chosen samples in a particular order - think of it as your canvas and your samples as your paint.
I would highly recommend listening very careful to the structure of some of your favorite artists tracks paying close attention to the types of sounds used as well as the way they are layered and positioned. This may seem obvious but it will really help you to make your own beat sound better and more professional.
Also, make sure you don't get lured in by free online beat makers as they really are a waste of time in my opinion. The samples they use are limited in quantity and severely lacking in quality. You won't be able to produce anything of any real quality on these so steer clear and look for a decent hip hop beat maker.
I was lucky enough to find one which allowed me to produce my first tune in under ten minutes! Seriously if you are serious and really want to make your own beat then there really is nothing holding you back.
Subscribe to:
Posts (Atom)